Nolwenn Lun 13 Mar 2006 - 14:42
Merci à tous pour les gentils commentaires.
En fait Patrice il manque un manuel pour ce synthé, mais j'avais sauvegardé une page d'un forum où le developpeur expliquait les parties "obscures".
J'aime bien le petit point jaune qui se déplace sur les enveloppes :-)
patrice a écrit:Tu l'as toujours quelquepart sur ton PC ? :roll:
Je peux copier coller le texte utile, même si à la relecture ça reste un peu cryptique.
about the ABCD square/knobs:
- The ABCD square represents the "mixing plane" of the four Augur oscilators.
- On this plane you can draw a four-segment envelope. For example, selecting the preset number 5 (4osc pad) you will see a figure with five numbered points (0-4). This is the 4-segment envelope, where each point is a mix of the four Augur's oscilators depending on the point position inside the square. Each of the five points can be freely positioned anywhere inside the square.
- Press a key on your keyboard. You can see a little moving point going from 0 to 1, then to 2, then to 3, then stop; it only moves from 3 to 4 when you release the key.
- When this happens the sound changes because the oscilator's mix varies in time according to the 4-segment envelope and its five point positions on the square.
- The four knobs under the square control the travelling rates for each of the four segments. The leftmost knob, for example, controls the time that the moving point takes to go from 0 to 1. The same applies to the other knobs/segments.
- You can loop this envelope in several different ways (segments/directions). Using the 4osc pad preset, change the looping options and see/hear what they do. It is pretty self-explaining.
- If you loop the envelope (any "Loop" option but "off") you can also control how many times the loop will repeat: continuous - the chosen loop loops forever; 1, 2, 3...7 times and then stop.
Well, I don't know if I made myself clear but that is pretty much it. Play with the presets and change things - for me this is still the best way to understand a new synth
What do the pan pots do in Augur?
Each pot controls panning of one voice (as by default there are 8 voices). If you increase the voice number, then the pan positions are repeated. And no, there is no way to predict what voice will be used
Source : KvR, auteur : Antti.
Il explique le machin ABCD, c'est ce qui m'a posé le plus de problème, je suis pas forte pour tout ce qui est "repérage dans l'espace".
Et il explique aussi les 8 boutons pan en bas à droite.
En fait le plus dur pour moi à comprendre ça a été que ce 0-1-2-3-4 dans le carré ABCD c'est la même chose que les ADSR plus bas, du moins ça fonctionne pareil.
Dernière édition par le Lun 7 Aoû 2006 - 23:04, édité 2 fois